Restore function · Earn certification

Fire Escape Repair Boston

Structural fire escape repair for Boston properties where corrosion, failed anchors, or damaged stairs put life safety and Massachusetts / City certification at risk. We restore function so documentation can honestly follow.

Request a Repair Estimate
Two workers repairing a black fire escape on a Main Street brick building in Massachusetts

What we sell

A certified, functional fire escape is a life-safety system.

Boston Fire Escapes sells safety and code-aligned exterior egress—not decorative ironwork. Inspection, repair, and certification exist so your fire escape can perform in an emergency and satisfy Massachusetts and City of Boston requirements.

Life safety first

A fire escape is an emergency exit. If it fails under load, tenants, residents, and first responders lose a critical way out.

Certified under code

Boston and Massachusetts expect applicable exterior egress systems to be inspected, documented, and kept within the current City and state process—not left to guesswork.

Functional, not cosmetic

Paint alone does not make a fire escape safe. Treads, landings, rails, anchors, and connections must actually work when people need them.

Documented for owners & managers

Inspection findings, repair scopes, and certification support give owners, boards, buyers, lenders, and property managers a clear compliance trail.

If the structure is unsafe, it cannot honestly be treated as certified. If it is certified on paper but cannot carry people in an emergency, it has failed its purpose. We connect field condition, repair when required, and documentation under the applicable code path.

Get Your Fire Escape Inspected

Fire escape repair is life-safety work, not cosmetic patching.

Exterior steel lives in weather. Over time, water collects at landings, salt attacks fasteners, coatings fail, and hidden connections lose section. Paint can protect after the structure is addressed—but paint alone does not correct unsafe stairs, deteriorated supports, failed anchors, or compromised load paths. If it cannot carry people in an emergency, it is not ready for certification.

What this service covers

Rust & Section Loss

Identify steel deterioration that may require reinforcement or component replacement.

Treads & Landings

Repair or replace damaged walking surfaces, platforms, grating, and stair components.

Connections & Anchors

Address loose brackets, failed welds, wall anchors, bolts, and bearing conditions.

Welding & Steel Repair

Coordinate practical steel repairs and replacement parts around access and safety needs.

Code-aligned path

From inspection to certified, functional egress

A clear Massachusetts / Boston workflow: inspect for safety, repair what fails, then document certification only when the fire escape can perform.

  1. 01

    Schedule Inspection

    Send the address, access details, photos, and any notice or deadline.

  2. 02

    Professional Inspection

    The exterior egress system is reviewed as a life-safety structure under code—not only surface finish.

  3. 03

    Inspection Report

    Deficiencies, photos, and required next steps are organized for ownership and compliance teams.

  4. 04

    Repair If Required

    Unsafe steel, anchors, rails, treads, landings, and connections are scoped so the system can function.

  5. 05

    Final Verification

    Completed work is reviewed before certification documentation moves forward.

  6. 06

    Certification / Affidavit

    When the structure supports it, certification or affidavit documentation follows the current City and state process.

Safety decision

After Your Inspection

Certification is earned by condition—not assumed. The goal is a fire escape that is both documented and able to protect people.

Fire Escape Is Acceptable

When the system is structurally sound and functional, inspection leads to report, certification documentation, and the next five-year cycle under the applicable Boston process.

Repairs Are Required

If deficiencies put safety or code compliance at risk, we document findings, scope repairs, restore function, verify the work, then support certification documentation.

Common issues and applications

Violation Notices

Turn notices, failed inspections, and deadlines into a repair path.

Repair vs. Replacement

Localized deterioration may be repairable; widespread loss may require replacement.

Photo Documentation

Photos help clarify urgency, access, damaged components, and next steps.

Fire escape certification FAQ

Can a rusty fire escape be repaired?

Often, yes. The answer depends on whether the rust is cosmetic or whether it has caused structural deterioration at components or connections.

Does repair happen before certification?

When deficiencies are found, repair and final verification typically happen before certification documentation can move forward.

What should I send for an estimate?

Send the property address, photos, any violation or inspection notice, access constraints, and deadline.

Property manager workflow

Manage multiple properties?

Boston Fire Escapes works with property managers responsible for individual buildings and larger portfolios. We provide structured inspection scheduling, professional documentation, deficiency reporting, repair coordination, and certification support.

Discuss Your Property Portfolio

Multi-property scheduling

Plan inspection cycles across individual buildings or larger portfolios.

Inspection records

Keep condition notes, photos, notices, and next steps organized.

Photo documentation

Use field photos to support decisions, owners, boards, and repair scopes.

Repair coordination

Move from findings to repair planning, scheduling, and verification.

Protect people. Stay in code.

Need a certified, functional fire escape in Boston?

Schedule inspection, upload a notice, or request repair review. We align field safety with Massachusetts and City of Boston documentation requirements.

(617) 271-8278